The DB2 ECCR encountered the error that is identified in a preceding message. This message provides additional information about the error.
The DB2 ECCR reacts in one of the following ways, depending on the reported error response:
ATTEMPTS TO CONTINUE
. The DB2 ECCR stops processing the record or operation that caused the error. Then the ECCR tries to process the next log record or the next ST definition.
ABENDS
. The DB2 ECCR abends because the error is too severe to continue.
ABENDS with PERMIL=0
. The DB2 ECCR abends because the REPL2CTL file contains or defaults to the EC PERMIL=0 control statement.
ABENDS‑PERMIL=THRESHOLD IS EXCEEDED
. The DB2 ECCR abends because the number of errors that occurred exceeds the maximum number of errors that are specified in the EC PERMIL control statement in the REPL2CTL file.
Depending on the error response and system action, respond in one of the following ways:
ATTEMPTS TO CONTINUE
. No response is required.
ABENDS
. Use the information in the associated messages to determine your response.
ABENDS with PERMIL=0
. Set the EC PERMIL control statement in the REPL2CTL file to a value greater than 0 to allow the DB2 ECCR to skip the log records that result in errors. Then restart the ECCR.
ABENDS‑PERMIL= THRESHOLD IS EXCEEDED
. Increase the EC PERMIL value in the REPL2CTL file. Then restart the ECCR. The larger EC PERMIL value enables the ECCR to tolerate more errors and skip more log records that result in errors.