PowerExchange for CDC and Mainframe
- PowerExchange for CDC and Mainframe 10.5.2
- All Products
ASK BOLOPreview
Please log in to access Bolo.
ASK BOLOPreview
Reason Code
| Explanation
|
|---|---|
00FAFF01
| The chainer module could not obtain a work area.
|
00FAFF02
| The chainer module was unable to obtain a buffer prefix.
|
00FAFF03
| The chainer module was unable to obtain a buffer.
|
00FAFF04
| A GETBUFF macro error occurred. It was unable to get a buffer.
|
00FAFF05
| A MOVEREC macro error occurred, and it returned an unknown return code.
|
00FAFF06
| The chainer module is unable to add a unit of work (UOW).
|
00FAFF07
| The chainer module is unable to delete a unit of work (UOW).
|
00FAFF08
| A WRITE to a restart data set (ERDS) failed.
|
00FAFF09
| The MOVEREC macro could not write to a log begin_checkpoint record.
|
00FAFF0A
| The MOVEREC macro could not write to a log UOW_summary record.
|
00FAFF0B
| The MOVEREC macro could not write to a log end_checkpoint record.
|
00FAFF0C
| The chainer module was unable to add an entry to the CHK queue.
|
00FAFF0D
| The logical logger processor was unable to obtain a LOGQ latch.
|
00FAFF0E
| An attempt to connect to common services failed.
|
00FAFF0F
| The chainer module was unable to delete an entry from the CHK queue.
|
00FAFF10
| The $DLICQPL macro could not open a circular queue.
|
00FAFF11
| The PowerExchange logical logger processor (EDMLLLG0) was unable to obtain a LOGS latch.
|
00FAFF12
| The PowerExchange logical logger processor (EDMLLLG0) was unable to read the global queue.
|
00FAFF13
| The PowerExchange logical logger processor (EDMLLLG0) received a STIMERM SET error.
|
00FAFF14
| The MOVEREC macro received a packet trailer error in the PowerExchange logical logger processor (EDMLLLG0) module.
|
00FAFF15
| The PowerExchange logical logger processor (EDMLLLG0) module entered an ESTAE routine.
|
00FAFF16
| The PowerExchange logical logger processor (EDMLLLG0) received a physical logger error while attempting a checkpoint (CHKPT).
|
00FAFF17
| The PowerExchange logical logger processor (EDMLLLG0) received a physical logger error while attempting a checkpoint (CHKPT).
|
00FAFF18
| The PowerExchange logical logger processor (EDMLLLG0) received a physical logger error while attempting a HARDN command.
|
00FAFF19
| The PowerExchange logical logger processor (EDMLLLG0) received a physical logger error while attempting a HARDN command.
|
00FAFF1A
| The PowerExchange logical logger processor (EDMLLLG0) exceeded the maximum LOGRBA.
|
00FAFF1B
| The PowerExchange logical logger processor (EDMLLLG0) was unable to obtain a LOGQ latch.
|
00FAFF1C
| The PowerExchange logical logger processor (EDMLLLG0) received a STIMERM CANCEL error.
|
00FAFF1D
| The PowerExchange logical logger processor (EDMLLLG0) could not open the XCF message queue.
|
00FAFF1E
| The PowerExchange logical logger processor (EDMLLLG0) encountered an error in COMMUOW and could not complete a PUT command on the XCF message queue.
|
00FBFF01
| The chainer module could not obtain a work area.
|
00FBFF02
| The chainer module could not initialize the TC task control queue.
|
00FBFF03
| The chainer module could not add an entry to the TCQ queue.
|
00FBFF04
| The chainer module could not terminate the CMD queue.
|
00FBFF05
| An error occurred while loading the dictionary.
|
00FBFF06
| The chainer module could not delete the ECBLIST area.
|
00FBFF07
| The chainer module could not obtain the ECBLIST area.
|
00FBFF08
| The chainer module could not terminate the TCQ queue.
|
00FBFF0A
| The chainer module could not terminated the STR queue.
|
00FBFF0B
| The chainer module could not delete a work area.
|
00FBFF0C
| The chainer module could not terminate the GBLLIFPQ queue.
|
00FBFF0D
| The chainer module was unable to free an externalized CMD (EDMD) area.
|
00FBFF0E
| The chainer module could not delete the IPQ queue.
|
00FBFF0F
| The chainer module was unable to delete an entry from the LIFCMSQ queue.
|
00FBFF10
| The chainer module could not add an entry to the TCQ queue.
|
00FBFF11
| An ATTACH command returned a nonzero return code.
|
00FBFF13
| The chainer module was unable to flush entries from the input CMD queue.
|
00FBFF14
| The chainer module could not delete an entry from the TCQ queue.
|
00FCFF01
| The chainer module could not obtain a work area.
|
00FCFF02
| The chainer module could not delete a work area.
|
00FCFF03
| The chainer module could not delete the JNL queue.
|
00FCFF04
| The chainer module could not delete data.
|
00FCFF05
| The chainer module could not obtain a JNL record area.
|
00FCFF06
| The chainer module could not release a JNL record area.
|
00FCFF07
| An attempt to CLOSE or UNALLOCATE a JOURNAL data set failed.
|
00FCFF09
| The journal processor (EDMLJNL0) encountered a SHOWCB error after a PUT function.
|
00FCFF0A
| The journal processor (EDMLJNL0) encountered a SHOWCB error after a PUT function.
|
00FCFF0B
| The journal processor (EDMLJNL0) encountered a SHOWCB error after a PUT function.
|
00FCFF0C
| An attempt to obtain an area to build a JOURNAL HEADER statement failed.
|
00FDFF01
| An attempt to flush inactive LOCAL control blocks failed.
|
00FDFF02
| An attempt by the chainer module to delete a local area failed.
|
00FDFF03
| An attempt by the chainer module to obtain a work area failed.
|
00FDFF04
| An attempt by the chainer module to release a work area failed.
|
00FDFF05
| The chainer module was unable to free unused areas from the GBLP24Q queue.
|
00FDFF06
| The chainer module was unable to free unused areas from the GBLP31Q queue.
|
00FDFF07
| The chainer module was unable to free unused areas from the GBLGBLQ queue.
|
00FDFF08
| Cannot determine which ECB posted.
|
00FDFF09
| Error sending to global circular queue.
|
00FEFF01
| The chainer module could not obtain a work area.
|
00FEFF02
| The PowerExchange Logger was unable to open SYSIN.
|
00FEFF03
| The chainer module was unable to add a local area control block.
|
00FEFF04
| The PowerExchange Logger was unable to open SYSPRINT.
|
00FEFF05
| The chainer module was unable to obtain an area to build an input record.
|
00FEFF07
| The chainer module was unable to delete an output data area.
|
00FEFF08
| The chainer module was unable to delete an I/O queue.
|
00FEFF09
| The chainer module was unable to delete a local area.
|
00FEFF0A
| The chainer module was unable to delete a work area.
|
00FEFF0B
| The chainer module was unable to initialize an output queue.
|
00FEFF0C
| The third parameter, which shows the number of lines on a printed page, is invalid.
|
00FFCF01
| The chainer module could not obtain a work area.
|
00FFCF02
| The chainer module could not obtain a buffer area.
|
00FFCF03
| The MODCB macro failed to modify the RPL control block.
|
00FFCF04
| An attempt by this module to GET the master log control record failed.
|
00FFCF05
| An attempt by the chainer module to FIND the master log control record failed.
|
00FFCF06
| An attempt by this module to GET the primary active log control record failed.
|
00FFCF07
| An attempt by the chainer module to FIND the primary active log control record failed.
|
00FFCF08
| An attempt by this module to GET the secondary active log control record failed.
|
00FFCF09
| An attempt by the chainer module to FIND the primary archive log control record failed.
|
00FFCF0A
| An attempt by this module to GET the next archive log failed.
|
00FFCF0B
| An attempt by the chainer module to FIND the secondary archive log control record failed.
|
00FFCF0C
| The MODCB macro failed to modify the RPL control block.
|
00FFCF0D
| An attempt by this module to GET the checkpoint control record failed.
|
00FFCF0E
| An attempt by this module to PUT the checkpoint control record failed.
|
00FFDF01
| The chainer module could not obtain a work area.
|
00FFDF02
| The chainer module could not obtain a buffer area.
|
00FFDF03
| The MODCB macro failed to modify the RPL control block.
|
00FFDF04
| An attempt by this module to GET the master log control record failed.
|
00FFDF05
| An attempt by the chainer module to FIND the master log control record failed.
|
00FFDF06
| An attempt by this module to GET the primary active log control record failed.
|
00FFDF07
| An attempt by the chainer module to FIND the primary active log control record failed.
|
00FFDF08
| An attempt by this module to GET the secondary active log control record failed.
|
00FFDF09
| An attempt by the chainer module to FIND the primary archive log control record.
|
00FFDF0A
| An attempt by this module to GET the next archive log failed.
|
00FFDF0B
| An attempt by the chainer module to FIND the secondary archive log control record failed.
|
00FFDF0C
| The MODCB macro failed to modify the RPL control block.
|
00FFDF0D
| An attempt by this module to GET the checkpoint control record failed.
|
00FFDF0E
| An attempt by this module to PUT the checkpoint control record failed.
|
00FFEF01
| An attempt to obtain a buffer for the master log failed.
|
00FFEF02
| An attempt to perform an OPEN of the ERDS01 restart data set failed.
|
00FFEF03
| An attempt to perform an OPEN of the ERDS02 restart data set failed.
|
00FFF001
| An attempt to obtain a read buffer failed.
|
00FFF002
| An attempt to add a checkpoint to the internal checkpoint queue failed.
|
00FFF101
| The chainer module was unable to initialize the LOGQ COPY1 queue.
|
00FFF102
| The chainer module was unable to initialize the BLKQ COPY1 queue.
|
00FFF103
| The chainer module was unable to obtain a read buffer.
|
00FFF104
| The chainer module was unable to add an entry to the BLKQ COPY2 queue.
|
00FFF105
| The chainer module was unable to add an entry to the active LOGQ COPY2 queue.
|
00FFF106
| The chainer module was unable to add an entry to the archive BLKQ COPY2 queue.
|
00FFF107
| The chainer module was unable to add an entry to the archive LOGQ COPY2 queue.
|
00FFF201
| The chainer module was unable to initialize the LOGQ COPY1 queue.
|
00FFF202
| The chainer module was unable to initialize the BLKQ COPY1 queue.
|
00FFF203
| The chainer module was unable to obtain a read buffer.
|
00FFF204
| The chainer module was unable to add an entry to the BLKQ COPY1 queue.
|
00FFF205
| The chainer module was unable to add an entry to the active LOGQ COPY1 queue.
|
00FFF206
| The chainer module was unable to add an entry to the archive BLKQ COPY1queue.
|
00FFF207
| The chainer module was unable to add an entry to the archive LOGQ COPY1 queue.
|
00FFF301
| The chainer module was unable to initialize the LOGQ COPY1 queue.
|
00FFF302
| The chainer module was unable to initialize the BLKQ COPY1 queue.
|
00FFF303
| The chainer module was unable to obtain a read buffer.
|
00FFF304
| The chainer module was unable to add an entry to the BLKQ COPY2 queue.
|
00FFF305
| The chainer module was unable to add an entry to the active LOGQ COPY2 queue.
|
00FFF306
| The chainer module was unable to add an entry to the archive BLKQ COPY2 queue.
|
00FFF307
| The chainer module was unable to add an entry to the archive LOGQ COPY2 queue.
|
00FFF401
| The chainer module was unable to initialize the LOGQ COPY1 queue.
|
00FFF402
| The chainer module was unable to initialize the BLKQ COPY1 queue.
|
00FFF403
| The chainer module was unable to obtain a read buffer.
|
00FFF404
| The chainer module was unable to add an entry to the BLKQ COPY1 queue.
|
00FFF405
| The chainer module was unable to add an entry to the active LOGQ COPY1 queue.
|
00FFF406
| The chainer module was unable to add an entry to the archive BLKQ COPY1 queue.
|
00FFF407
| The chainer module was unable to add an entry to the archive LOGQ COPY1 queue.
|
00FFF501
| When the logger attempted to add an active log to the ERDS01 restart data set, it found an active log already present.
|
00FFF502
| The chainer was unable to add a log to the internal log queue, LOGQ2.
|
00FFF601
| When the logger attempted to add an active log to the ERDS01 restart data set, it found an active log already present.
|
00FFF602
| The chainer was unable to add a log to the internal log queue, LOGQ1.
|
00FFF701
| When the logger attempted to add an active log to the ERDS01 restart data set, it found an active log already present.
|
00FFF702
| The chainer was unable to add a log to the internal log queue, LOGQ2.
|
00FFF801
| When the logger attempted to add an active log to the ERDS01 restart data set, it found an active log already present.
|
00FFF802
| The chainer was unable to add a log to the internal log queue, LOGQ1.
|
00FFFB01
| The chainer module could not find an archive log to delete.
|
00FFFB02
| The chainer module was unable to perform a DELETE on the archive log queue, LOGQ2
|
00FFFC01
| The chainer module could not find an archive log to delete.
|
00FFFC02
| The chainer module was unable to perform a DELETE on the archive log queue LOGQ1.
|
00FFFD01
| The chainer module could not find an active log to delete.
|
00FFFE01
| The chainer module could not find an active log to delete.
|
00FFFF01
| The chainer module could not obtain a work area.
|
00FFFF02
| The chainer module could not obtain an ERDS01 restart data set buffer.
|
00FFFF03
| The chainer module could not obtain a ERDS02 restart data set buffer.
|
00FFFF04
| The PowerExchange Logger is unable to build the LOGQ11 log queue.
|
00FFFF05
| The PowerExchange Logger is unable to build the LOGQ12 log queue.
|
00FFFF06
| The PowerExchange Logger is unable to build the LOGQ21 log queue.
|
00FFFF07
| The PowerExchange Logger is unable to build the LOGQ22 log queue.
|
00FFFF08
| The PowerExchange Logger is unable to determine which log is the current active log.
|
00FFFF09
| The ERDS01 restart data set DD statement is missing.
|
00FFFF0A
| The PowerExchange Logger found an invalid restart data set (ERDS).
|
00FFFF0B
| An attempt by the GENCB module to obtain the ACB for ERDS01 restart data set failed.
|
00FFFF0C
| An attempt to OPEN the ERDS01 restart data set failed.
|
00FFFF0D
| An attempt by GENCB to obtain the ACB for ERDS02 restart data set failed.
|
00FFFF0E
| An attempt to OPEN the ERDS02 restart data set failed.
|
00FFFF0F
| The online and ERDS01 restart data set is empty.
|
00FFFF10
| An attempt by the GENCB macro to generate the RPL control block for the ERDS01 restart data set failed.
|
00FFFF11
| An attempt by the GENCB macro to generate the RPL control block for the ERDS02 restart data set failed.
|
00FFFF12
| An attempt to format the ERDS01 restart data set failed.
|
00FFFF13
| An attempt to format the ERDS02 restart data set failed.
|
00FFFF14
| An attempt to read the ERDS01 restart data set master log record failed.
|
00FFFF15
| An attempt to read the ERDS02 restart data set master log record failed.
|
00FFFF16
| An attempt by the MODCB macro to modify the ERDS01 restart data set RPL control block failed.
|
00FFFF17
| An attempt by the MODCB macro to modify the ERDS02 restart data set RPL control block failed.
|
00FFFF18
| The logger was unable to obtain the LOGQ latch.
|
00FFFF19
| The logger was unable to build the checkpoint queue, CHKPT.
|
