PowerExchange for CDC and Mainframe
- PowerExchange for CDC and Mainframe 10.5.2
- All Products
ASK INFAPreview
Please log in to access Bolo.
ASK INFAPreview
Reason Code
| Explanation
|
|---|---|
0033FF01
| The chainer module could not obtain a work area.
|
0033FF02
| An initialization error occurred. There was an invalid function code.
|
0033FF03
| An unknown return code was found during an attempt to move a record.
|
0033FF04
| The reader processor (EDMLLRD0) was unable to get a buffer.
|
0033FF05
| The reader processor (EDMLLRD0) detected an invalid record prefix.
|
0033FF06
| A refreshed buffer was not available for the reader processor (EDMLLRD0).
|
0033FF07
| The reader processor (EDMLLRD0) failed to get a refreshed buffer.
|
0033FF08
| The reader processor (EDMLLRD0) detected an invalid record prefix.
|
0033FF09
| There were entries in the read queue when the reader processor (EDMLLRD0) was expecting an empty queue.
|
0033FF0A
| There were no entries found in the available queue.
|
0033FF0B
| The reader processor (EDMLLRD0) failed to disconnect from PowerExchange common services.
|
0033FF0C
| The reader processor (EDMLLRD0) failed to connect to PowerExchange common services.
|
0033FF0D
| Available Queue empty when available buffer needed.
|
0033FF20
| Physical reader initialization failed.
|
0033FF21
| Error in GETBUFF.
|
0033FF22
| I/O error in physical read.
|
0033FF23
| I/O error in physical reread.
|
0033FF24
| Physical reader termination failed.
|
0033FF25
| During an unallocate call, physical reader termination failed.
|
00D5FF01
| Logger invoked in non‑APF authorized state.
|
00D5FF02
| Invalid function code supplied to EDMLPRD0.
|
00D5FF03
| Dynamic allocation error for archive log dataset in EDMLPRD0.
|
00D5FF04
| Open failed for archive log dataset in EDMLPRD0.
|
00D5FF05
| RBA value has reached maximum permitted value (X'FFFFFFFFFFFF') in EDMLPRD0.
|
00D5FF06
| Unexpected RBA encountered in archive log in EDMLPRD0 (missing or duplicated block(s)).
|
00D5FF07
| Close failed for archive log dataset in EDMLPRD0.
|
00D5FF08
| Invalid LOGQ parameter supplied to EDMLPRD0 at initialization.
|
00D5FF09
| EDMLPRD0 could not locate secondary archive log dataset.
|
00D5FF0A
| No buffers available at initialization in EDMLPRD0.
|
00D5FF0B
| No buffers available at start of read in EDMLPRD0.
|
00D5FF0C
| Dynamic un‑allocation error for archive log dataset in EDMLPRD0.
|
00D5FF0D
| Invalid LOGQ parameter supplied to EDMLPRD0 at start of read.
|
00D5FF0E
| Unexpected RBA encountered in archive log dataset at EOF in EDMLPRD0 (missing block(s)).
|
00D6FF01
| The chainer module could not obtain a work area.
|
00D6FF02
| Invalid function code supplied to EDMLPRD1.
|
00D6FF03
| Dynamic allocation error for active log dataset in EDMLPRD1.
|
00D6FF04
| Open failed for active log dataset in EDMLPRD1.
|
00D6FF07
| Close failed for active log dataset in EDMLPRD1.
|
00D6FF08
| Invalid LOGQ parameter supplied to EDMLPRD0 at initialization.
|
00D6FF09
| EDMLPRD1 could not locate secondary active log dataset.
|
00D6FF0A
| No buffers available at initialization in EDMLPRD0.
|
00D6FF0B
| No buffers available at start of read in EDMLPRD0.
|
00D6FF0C
| The chainer module was unable to find an entry in the GBLBLKQ11 queue.
|
00D6FF0D
| The chainer module was unable to find an entry in the GBLBLKQ12 queue.
|
00D6FF0E
| The chainer module was unable to find an entry in the GBLBLKQ21 queue.
|
00D6FF0F
| The chainer module was unable to find an entry in the GBLBLKQ22 queue.
|
00D6FF10
| Invalid LOGQ parameter supplied to EDMLPRD1 at start of read.
|
00D6FF11
| Invalid LOGQ parameter supplied to EDMLPRD1 at start of reread.
|
00D6FF12
| Error adding entry to GBLPH1QCB queue in EDMLPRD1.
|
00D6FF13
| Primary active log stopped and dual active logs not available.
|
00D6FF14
| Maximum retries (100) exceeded to successfully reread block from active log dataset in EDMLPRD1.
|
00D7FF01
| The chainer module could not obtain a work area.
|
00D7FF02
| The chainer module could not release a work area.
|
00D7FF03
| The MODCB macro failed to modify the RPL control block.
|
00D7FF04
| The print ERDS command processor (EDMLPR50) failed to GET the master log control record.
|
00D7FF05
| The print ERDS command processor (EDMLPR50) failed to GET the primary active log control record.
|
00D7FF06
| The print ERDS command processor (EDMLPR50) failed to GET the secondary active log control record.
|
00D7FF07
| The print ERDS command processor (EDMLPR50) failed to GET the primary archive log control record.
|
00D7FF08
| The print ERDS command processor (EDMLPR50) failed to GET the secondary archive log control record.
|
00D7FF09
| The print ERDS command processor (EDMLPR50) failed to GET the checkpoint control record.
|
00D7FF0A
| The print ERDS command processor (EDMLPR50) entered an ESTAE routine.
|
00D8FF01
| The chainer module could not obtain a work area.
|
00D8FF02
| The chainer module could not release a work area.
|
00D9FF01
| The chainer module could not obtain a work area.
|
00D9FF02
| The chainer module could not release a work area.
|
00DAFF01
| The chainer module could not obtain a work area.
|
00DAFF02
| The chainer module could not release a work area.
|
00DAFF04
| SYNAD entered a spooled sysout file in EDMLPR20.
|
00DBFF01
| The chainer module could not obtain a work area.
|
00DBFF02
| The chainer module could not release a work area.
|
00DBFF03
| Error connecting to Common Services.
|
00DCFF01
| The chainer module could not obtain a work area.
|
00DCFF02
| The chainer module could not release a work area.
|
00DDFF01
| The chainer module could not obtain a work area.
|
00DDFF02
| The chainer module could not release a work area.
|
00DDFF03
| Cannot determine which ECB posted.
|
00DDFF04
| The chainer module could not LOCK the queue control block (QCB).
|
00DDFF05
| The chainer module could not UNLOCK the queue control block (QCB).
|
00DDFF06
| Log reader disconnected from Logger before initialization was completed.
|
00DDFF07
| The PowerExchange Logger found an invalid log RBA.
|
00DDFF08
| An attempt to initialize a log reader failed.
|
00DDFF09
| An attempt to open a circular queue failed.
|
00DDFF0A
| A log reader READ command failed.
|
00DDFF0B
| An attempt to PUT to a circular queue failed.
|
00DDFF0C
| A circular queue end‑of‑file error occurred.
|
00DDFF0D
| An attempt to close a circular queue failed.
|
00DDFF0E
| An attempt to terminate a log reader failed.
|
00DDFF0F
| An attempt by the logger to connect to the common services failed.
|
00DDFF10
| An attempt to send a SENDPIPE command to the log read processor (LRP) failed.
|
00DDFF11
| Circular queue PUT error for Request Data Transfer reply.
|
00DDFF12
| No token found for XCF circular queue.
|
00DDFF13
| Attempt to open XCF circular queue failed.
|
00DEFF01
| The chainer module could not obtain a work area.
|
00DEFF02
| The chainer module could not release a work area.
|
00DEFF03
| An attempt to initialize a logical log reader failed.
|
00DEFF04
| An attempt by the logical log reader to perform a READ failed.
|
00DEFF05
| The PowerExchange Logger was unable to add a unit‑of‑work (UOW) entry to an internal UOW queue.
|
00DEFF06
| An attempt to terminate the logical log reader failed.
|
00DEFF07
| The PowerExchange Logger was unable to find a logrba in the selected logs.
|
00DEFF08
| The PowerExchange Logger could not find a UOW for begin_PHASE1.
|
00DEFF09
| The PowerExchange Logger could not find a UOW for begin_PHASE2.
|
00DEFF0A
| The PowerExchange Logger could not find a UOW for end_PHASE1.
|
00DEFF0B
| The PowerExchange Logger could not find a UOW for end_PHASE2.
|
00DEFF13
| Cannot locate record prefix while repositioning in log on restart (EDMLPLG1).
|
00DFFF01
| The chainer module could not obtain a work area for the write to operator with reply (WTOR) parameter list.
|
00DFFF02
| The chainer module could not release a work area for the write to operator with reply (WTOR) parameter list.
|
00DFFF03
| The chainer module could not release a work area for the write to operator with reply (WTOR) message text.
|
00DFFF04
| The chainer module could not release a work area for the write to operator with reply (WTOR) output data area.
|
00DFFF05
| The chainer module could not release the OPQ control block.
|
00E0FF01
| The chainer module could not obtain a work area.
|
00E0FF02
| The chainer module could not release a work area.
|
00E1FF01
| The chainer module could not release a work area.
|
00E2FF01
| An incorrect post code was detected by the receiving module.
|
00E2FF02
| An attempt to find an element address failed.
|
00E2FF03
| The PowerExchange Logger cannot free a latch that is not held.
|
00E2FF04
| A module is using a latch and it issued a request to use it again. A module cannot acquire a latch that it is currently using.
|
00E2FF05
| The PowerExchange Logger latching processor could not find any latch queue control block (QCB) entries.
|
00E3FF01
| A normal dump has been requested.
|
00E4FF01
| The chainer module could not obtain a work area.
|
00E4FF02
| The chainer module could not release a work area.
|
00E5FF01
| The chainer module could not obtain a work area.
|
00E5FF02
| Error performing buffer Force_write operation.
|
00E5FF03
| Error performing Trunc_Log operation.
|
00E5FF04
| The chainer module could not release a work area.
|
00E5FF05
| Archive Log operation already in progress.
|
00E5FF06
| Error performing Trunc_Buff operation.
|
00E5FF07
| Error connecting to Common Services.
|
00E6FF01
| An attempt by the chainer module to add a record to a queue failed.
|
00E6FF02
| The chainer module is unable to obtain an area for a DATA COPY.
|
00E7FF01
| The chainer module could not obtain a work area.
|
00E7FF02
| The chainer module could not release a work area.
|
00E7FF03
| An attempt to delete an old logger EDMUPARM module failed.
|
00E7FF04
| An attempt to open the EDMPARMS data set failed.
|
00E8FF03
| The pattern match processor found arguments with a length less than zero (0).
|
00E8FF04
| The pattern match processor found a pattern larger than 256 bytes.
|
00E9FF01
| Latch obtain error in EDMLOF20.
|
00E9FF02
| The active log archive processor could not find an active log present in the LOGQ log queue.
|
00E9FF03
| Dynamic allocation for the archive COPY1 data set failed.
|
00E9FF04
| An attempt to perform an OPEN on the archive COPY1 data set failed.
|
00E9FF05
| Dynamic allocation for the archive COPY2 data set failed.
|
00E9FF06
| An attempt to perform an OPEN on the archive COPY2 data set failed.
|
00E9FF07
| The PowerExchange Logger latching processor could not obtain the LOGQ COPY1 log queue.
|
00E9FF08
| The PowerExchange Logger latching processor could not obtain the LOGQ COPY2 log queue.
|
00E9FF09
| EDMLOF20 could not find COMMSRV connect token.
|
00E9FF0A
| The DIV ACCESS macro was unable to access the active logs.
|
00E9FF0B
| Primary (and secondary if applicable) active log dataset(s) stopped
|
00E9FF0C
| The DIV UNIDENTIFY macro was unable to unidentify the active log.
|
00E9FF0D
| A CLOSE command failed on an archive COPY1 data set.
|
00E9FF0E
| The RDJFCB macro failed on an archive COPY1 data set.
|
00E9FF0F
| A CLOSE command failed on an archive COPY2 data set.
|
00E9FF10
| EDMLOF20 could not find secondary active log in LOGQ.
|
00E9FF11
| An UNALLOCATE command failed on an archive COPY1 data set.
|
00E9FF12
| An UNALLOCATE command failed on an archive COPY2 data set.
|
00E9FF13
| An UNALLOCATE command failed on active log.
|
00E9FF14
| An internal DEFINE_LOG COPY1 command failed.
|
00E9FF15
| An internal DEFINE_LOG COPY2 command failed.
|
00E9FF16
| The chainer module could not release a work area.
|
00E9FF17
| The chainer module could not add a local area.
|
00E9FF18
| The chainer module could not initialize the OPQ control block.
|
00E9FF19
| The chainer module could not find an entry in the GBLBLKQ11 queue.
|
00E9FF20
| The chainer module could not find an entry in the GBLBLKQ12 queue.
|
00E9FF21
| The chainer module could not find an entry in the GBLBLKQ21 queue.
|
00E9FF22
| The chainer module could not find an entry in the GBLBLKQ22 queue.
|
00E9FF23
| The chainer module was unable to find an entry for LOG2 in the LOGQ queue.
|
00E9FF24
| The active log archive processor is using the last active log.
|
00E9FF25
| The log archive processor was unable to find a LOG2 data set name.
|
00E9FF26
| SYNAD entered for archive log 1.
|
00E9FF27
| SYNAD entered for archive log 2.
|
00E9FF30
| Latch release error in EDMLOF20.
|
00E9FF34
| Update ERDS process failed.
|
00EAFF01
| The chainer module could not obtain a work area.
|
00EAFF02
| The chainer module could not release a work area.
|
00EBFF01
| The chainer module could not obtain a work area.
|
00EBFF02
| The chainer module could not release a work area.
|
00EC0040
| The module receives an unexpected return code from the DBCTL subsystem interface. Contact your Informatica technical support analyst for assistance.
|
00ECFF01
| The chainer module could not obtain a work area.
|
00ECFF02
| The GETMAIN macro failed.
|
00ECFF03
| The FREEMAIN macro failed.
|
00EDFF01
| The chainer module could not obtain a work area.
|
00EDFF02
| The chainer module could not release a work area.
|
00EEFF01
| The chainer module could not obtain a work area.
|
00EEFF02
| The chainer module could not release a work area.
|
00EFFF01
| The chainer module could not obtain a work area.
|
00EFFF02
| The chainer module could not release a work area.
|
