Command Reference

10.0
- 10.5.5
- 10.5.4
- 10.5.3

Back Next

RESOLVE_INDOUBT Command

Forces the PowerExchange Logger for MVS to either commit or discard open UOWs that have a status of

in-flight

For example, assume that an ECCR terminated abnormally and left an in-flight UOW. Normally, when you perform a warm start of the ECCR, any in-flight UOWs are resolved. However, you might not be able to restart the ECCR, or when you perform a warm start, the normal resolution of the in-flight status fails to occur. In this case, use the RESOLVE_INDOUBT command to resolve the in-flight UOW.

Syntax

Use the following command syntax:

MODIFY proc_name,RESOLVE_INDOUBT UOW=X'uow_id'[,ECCR=eccr_name],ACTION={ABORT|COMMIT}

Alternatively, you can use the following shorter command syntax:

F proc_name,RI U=X’uow_id’[,E=eccr_id],A={A|C}

F proc_name,RES_UOW U=X’uow_id’[,E=eccr_id],A={A|C}

The proc_name variable is the PowerExchange Logger procedure name.

Parameter Descriptions

The following parameters are required:

UOW=X’uow_id’: The UOW ID of the in-flight UOW that you want to commit or discard. Enter the ECCR-assigned UOW ID in hexadecimal format, beginning with the letter “X” followed by a 36-character string enclosed in single-quotation marks. To get this identifier, issue the
DISPLAY OBJECT=CONNECTION,TYPE=UOW
command and look for UOW=X'value' in the output.
ECCR=eccr_id: Optional. Specifies the name of the ECCR that captured the in-flight UOW that you want to commit or discard. If you specify this parameter, the PowerExchange Logger verifies that the ECCR owns the UOW that you are attempting to resolve. If you specify the wrong ECCR name, the command ends with error message PWXEDM172681E.
ACTION={COMMIT|ABORT}: Indicates whether to commit or discard the specified in-flight UOW. Enter one of the following options:

COMMIT. Commits the UOW.

ABORT. Discards the UOW.

Example

The DISPLAY OBJECT=CONNECTION,TYPE=UOW command produces the following report, which indicates that an in-flight UOW exists for the PowerExchange Logger PWXLOGR1:

PWXEDM172679I EDM Logger UOW Connection report follows:
     _Name__________________________________Logger_UOW________________Type_and_Status_
     |E7E8000000000012F324F9B0000000000000  SXPL000006A8D6FE00000000  UOW In_Flight

To commit this in-flight UOW, issue the following RESOLVE_INDOUBT UOW command with the UOW hexadecimal value from the Name
field of the report:

F PWXLOGR1,RESOLVE_INDOUBT U=X'E7E8000000000012F324F9B0000000000000',A=C

Rename Saved Search

Table of Contents

Command Reference

Command Reference

RESOLVE_INDOUBT Command

RESOLVE_INDOUBT Command

Syntax

Parameter Descriptions

Example